About Ekospray
About Ekospray
EKOSPRAY® POLYURETHANE INSULATION FOAM – the most effective sustainable solution on the market!
EKOSPRAY® is a safe, well-known polyurethane foam which has been guaranteeing high-quality insulation for even the most demanding objects for over 40 years. EKOSPRAY® insulations provide this heat-insulating foam in sprayable form for use in any renovation project.
Spray polyurethane insulation foam takes into account the insulation requirements of different buildings, construction materials, multiform surfaces and areas of application. As it also sets firmly on irregular surfaces, it is the insulation material of choice for professionals when, for example, insulating base-floor spaces with limited access.
EKOSPRAY USE CASES
Compact insulation layer
Seamless and
solid
Serves as a vapor barrier
Does not
mildew
Does not
rot
Does not block mobile phone signals
Insultion thickness is scaled
Lifespan of more then 100 years
Insulation form and performance are preserved
Environmentally
friendly
Reactor3 Fully Connected from Drum to Gun
Meet the NEW Reactor 3, the spray foam system with the easiest start-up, operation and maintenance, and drum-to-gun connectivity that allows for optimal results. The new Graco Reactor 3 electric spray system is the preferred solution for all your spray foam or polyurea applications. Its smart technology enables full drum-to-gun connectivity, allowing you to precisely control material flow, pressure and heat for perfect ratio consistence.
THE NEW REACTOR 3 PROVIDES THE HIGHEST QUALITY RESULTS
Reactor 3 is not just a new proportioner. Graco has developed a fully new platform that can be connected from Drum-to-Gun. Upgrade your rig with a powerful NEW Reactor 3 proportioner, built with advanced capabilities for spray foam and polyurea applications. Reactor 3 is designed to communicate with the entire system to simplify the operator’s job, optimise spray parameters and maximise productivity.
Automated on-ratio performance
Faster, lighter & easier
Optimised productivity and profitability
Reactor3 System
Spray with confidence with the complete Reactor3 system
Technical Information
Katalyst Control
Spray with confidence
When spraying foam or polyurea, ratio assurance is crucial. Spraying off-ratio not only leads to poor results, it can also be hazardous and present health risks. You need to be able to fully rely on your proportioner, whatever the circumstances or the job. At the same time your equipment must be easy to use and allow you to work quickly and efficiently.
Katalyst control for Reactor3
Helps eliminate the largest causes of off-ratio issues
Reactor 3 Elite model with Core E1 Transfer Pumps are necessary to activate Katalyst System Intelligence. Standard and Pro models can upgrade hardware to activate Katalyst System Intelligence.
| Issue | Solution with Katalyst system |
|---|---|
| Air in the fluid stream | Automatically shuts system down when material has run out so air does not enter into the fluid system |
| Improperly feeding the Reactor with material | Automatically adjusts power to the pumps to always provide optimal material feed to the Reactor, such as helping to eliminate issues related to cold materials |
The only fully-connected system from drum to gun
POLYUREA MODELS
Polyurea models
Look into our selection of polyurea models
designed for low and high pressure applications.
Technical Information
New touchscreen control
Easier to control and access information
The new larger interface provides simple touchscreen operations and makes the Reactor easy to operate. All the necessary spray information and control is on one screen, making it intuitive and easy to understand. New setup menus offer more controls than ever for owners and managers to optimise the machine for their business needs.
Picture shown represents an Elite model.
Reactor connect
Remote monitoring is always within reach
Reactor Connect is designed for both Sprayers and Owners/Managers alike. Use Reactor Connect to track ratios, receive alerts and view data directly from your smartphone. As a result, sprayers and owners/managers can monitor rigs, access reports, troubleshoot issues from anywhere and get the crew back to work quickly.
Core E1 electric transfer pumps
Powerful, Quiet, Smart
Get in the flow with Graco’s revolutionary NEW Core electric transfer pumps; designed to optimise material supply and minimise downtime. Quieter and less expensive to operate than traditional pneumatic pumps, the new electric pumps can communicate with the Reactor 3 to give you a fully-connected system.
Xcelerator heated hoses
Faster to heat, lighter weight, improved flexibility
Graco’s new Xcelerator heated hoses provide more options and control than ever. All Xcelerator hoses are designed to provide full independent A and B temperature control. This provides more precise pressure balancing and improved material yield. New robust construction provides longer life and reduced maintenance.
New internally Heated Hose
Smallest, lightest weight connections in the industry
Ekospray technical information
Closed cell Ekospray PU insulation provides tight insulation, a vapour barrier, wind protection and support for structures. Without a separate wind-protective panel or vapour barrier. No aluminium membranes that could interrupt telecommunications. Closed cell Ekospray is not damaged by wetness during construction or moisture in structures. The insulation does not gather mould nor does it rot.
Ekospray insulations are made and sprayed on the installation site to the desired thickness.
Ekospray insulation enables insulating even the more complicated forms and structures in a seamless manner. Closed cell insulation does not let draught through. Insulations do not require fasteners, studs or supporting structures, and they can be installed on tilted and unsealed bases.
A 150 mm insulation layer meets the U value standards set in the Building Code of Finland (0.17 W/mK), and 35 mm layer of Ekospray insulation is already enough to create water vapour resistance, so a separate water vapour barrier is not needed.
EKOSPRAY technical information
Ekospray
- High-performance insulation foam
- M1 classified
| Unit weight | 475 kg | |
| Density | 28…31 kg/m3 | EN ISO 845 |
| Thermal conductivity in 10°C | 0,022 W/mK | EN 12667/EN 12939 |
| Thermal conductivity λ declared | 0,025 W/mK/ 120 mm diffusion open surfaces | EN 14315-1 |
| Compression strength | ≥ 150 kPa…250 kPa | EN ISO 844 |
| Closed cells | 90 % | ISO 4590 |
| Fire class | E | EN ISO 11925-2 |
Ekospray HFO
- High-performance insulation foam
- Fourth-generation propellant (HFO)
- M1 classified
| Unit weight | 475 kg | |
| Density | 28 kg/m3 | EN 1602 |
| Thermal conductivity in 10°C | 0,021 W/mK | EN 12667 |
| Thermal conductivity λ declared | 0,024 W/mK/ 120 mm diffusion open surfaces | EN 12667 |
| Compression strength | ≥ 150 kPa | EN 826 |
| Closed cells | 90 % | ISO 4590 |
| Fire class | E | EN 13501-1 |
Ekospray Open cell light
- Cost-efficient open cell insulation foam
| Unit weight | 475 kg | |
| Density | 8 kg/m3 | EN ISO 845 |
| Thermal conductivity | 0,039 W/mK | ISO 8301 |
| Closed cells | 2,5% | ISO 4590 |
| Water absorption | ≤ 16 kg/m2 | ≤ 16 kg/m2 |
| Fire class | E | EN ISO 11925-2 |
EKOSPRAYN TEKNISET TIEDOT
For immediate info on Ekospray® and Graco®
call + 358 9 6810 8268 or write ekospray@bangbonsomer.com